Silicone for HR foam/Silicone surfactant XH-2837-TDS-EN
Product Description
WynPUF* XH-2837 is non-hydrolyze silicone surfactant, designed specially for TDI or T/M based HR molded foam applications.
Key Features and Benefits
● XH-2837 is high potency surfactant, not only have high bulk stability but also provide good stable for flow ability. So, the foam produced with this surfactant has better skin and sub-skin.
● Even at low use-levels, resulting in fine, uniform cell structure.
● Suitable for TDI or MDI/TDI mold foam formulations. In some MDI system with higher water level, XH-2837 is with less level can also has better performance.
● XH-2837 has very low VOC and fogging value, and it’s free of phthalate can meet the demand of car industry.
Typical properties
Appearance: Straw-color liquid.
Viscosity at 25°C：5-20CST
Water content: ＜0.2%
Levels of Use (additive as supplied)
Usually suitable for TDI and T/M system, and it suggested use-levels range from 0.4-1.0 parts per hundred polyol. In some MDI system, the dosage can be 0.3-0.5.
Package and storage stability
190 kg drums or 950kg IBC
WynPUF® XH-2837 should, if possible, be stored at room temperature. Under these conditions and in original sealed drums, has a shelf-life of 24 months.
Product Safety
When considering the use of any Top Win products in a particular application, review our latest Safety Data Sheets and ensure that the use intended can be accomplished safely. For Safety Data Sheets and other product safety information, contact the Top Win sales office nearest you. Before handling any of the products mentioned in the text, please obtain available product safety information and take necessary steps to ensure safety of use.
