Silicone deformers/Silicone anti-foam SD-3020
Product Details
WynCoat® SD-3020 is suitable for high solids, high build epoxy floor coatings and screen printing ink suppression foams.
Key Features and benefits
● There is good effect to prevent foaming caused by the manufacture and construction in high solids and non-solvent epoxy coatings.
● Excellent anti-foaming property in high viscosity and thick film, especially in non-solvent and high thick film epoxy flooring coatings
Technical Physical Properties
Appearance: translucent liquid
Active content: 100%
*Typical product data values should not be used as specifications.
Application Method
• Incorporate before grinding and stirring to achieve optimum efficiency. Then, post-addition is recommended incorporate SD-3010 with sufficient mixing.
• In order to get better distribution and effects, we suggest to triturate colored paint and grinding parts together.
• Due to SD-3010’s high active content, it can be pre-diluted to 10% solution with aromatic solvent. Because the hydrophobic particles is easy to precipitate, diluted product should spent immediately.
• SD-3010 shows thixotropic properties. Viscosity may be increase in low temperature or storage, but it is normality. We suggest to stir well before use.
*The optimum dosage level depends on the required effects and should be determined through laboratory tests.
Levels of Use (additive as supplied)
0.01-0.1% based on total formulation.
Packaging
Net weight: 25 kgs or 200 kgs.