Control release additive/Anchorage additive
Application
The LRA-2 is special design for lower the release force after release coating cured. It could be adding to release coating system (both solvent base or solventless system) during the mixing process. After cured, it could be achieved lower release force and with lower impact to the subsequence adhesive. This modifier would be efficiency for different type adhesive.
Application
SF 300 is special design for Glassine PEK, CCK etc. Substrate coating. The dosage of different component should be adjusted base on different process condition and application. After mixed components even, the coating on the substrate surface to curing and achieved the target release profile.
Advantage
● Active low release force additive
● Low silicone migration
● Suit for different type adhesive system.
Properties
Typical | SiemtCoat® LRA-2 | ||
Appearance | Transparent or slight turbid liquid | ||
Active % |
|
100 |
|
Vis (mPa.s @ 25°C) |
|
160 |
|
Flash point(°C, close cup) |
|
>300 |
|
Density(g/cm3) |
|
0.99 |
Processing
When application LRA-2 into Siemtcoat system, please following bellow ratio and mixing process: | |
|
100p |
|
|
|
0.5-5p |
|
|
Attention: do not mix the crosslinker and catalyst directly as dramatic reaction would happen | |
|
The detail information could consult us for the formulation advice.
Package
Net weight 20kg per drum or 1kg per bottle.
Or according to customer’s need.
Shelf-life
It should be storage in a closed container at -20°C to +30°C。
Standard shelf-life is 24 months. The expired day is marked on label for each drum.